AECOM Safety Basis/Technical Services Engineer 2 in Aiken, South Carolina

United States of America - South Carolina, Aiken

Job Summary

AECOM is seeking

Safety Basis/Technical Services Engineer 2 to be based in our Aiken, SC location. The Engineer is responsible for perform a variety of engineering assignments in planning and overseeing research, development, design, manufacture, test, installation, operation, and maintenance of diverse electronic/mechanical equipment and systems and generally as a member of a design, analysis or review team on more complex assignments or as a lead on less complex assignments.

Essential Responsibilities:

  1. Perform a range of design development, analysis or review tasks under some supervision.

  2. Design a portion or section of an analysis or design review.

  3. Generate sections of design specifications of more complex projects or complete specifications of less complex projects.

  4. Prepare, deliver and submit technical presentations for in process design and review meetings.

  5. Establish and maintain a filing system or databases as needed for tracking project status.

  6. Develop, maintain and produce technical documentation and system/subsystem specifications.

  7. Direct interface and liaison with customers at all levels from quotation to final design and test activities, design reviews and technical working group meetings to comply with requirements and specifications.

  8. Conduct site visits and investigate engineering problems, propose solutions and alternatives, and provide recommendations.

  9. Verify and comply with engineering documentation standards and test procedures.

Additional Information:

  • Qualified applicants who are offered a position must pass a background and pre-employment substance abuse test.

  • Relocation benefits are available for this position.

Minimum Requirements

  • Bachelor of Science degree in an appropriate engineering or sciences discipline from a four-year accredited college or university. Chemical, Electrical, Mechanical, or Nuclear Engineering degrees are preferred.

  • Must have a minimum of 3 years job-related experience, post-graduation, in an engineering setting.

  • Minimum of 1 year Experience/Knowledge in one or more of the following areas:

  • Documented Safety Analysis

  • Un-reviewed Safety Question (USQ)

  • Technical Safety Requirements.

  • Must be knowledgeable of 10 CFR 830, DOE-STD-3009, DOE-STD-120, and DOE STD-1189 requirements.

  • Candidate must be eligible to obtain a DOE Q clearance.

  • Candidate must be able to travel on business as needed.

  • Candidate must be open to relocation away from the area should the need arise.

  • Due to the nature of work, candidate must be a US Citizen.

Preferred Qualifications

  • Good writing and interpersonal skills

  • Demonstrated ability to perform engineering calculations

  • Ability to perform as part of a team

  • Creative problem solving

  • Ability to meet challenging deadlines

  • Customer-focused attitude

  • Minimum 1 year of work experience at a DOE Facility

  • Experience/Knowledge in one or more of the following areas:

  • Hazards Analysis – Experience in preparing hazards analyses in nuclear/chemical/oil & gas environments. This includes familiarity with the DOE (or NRC) standards and the ability to develop and revise existing Documented Safety Analysis and Hazard Assessment documents for nuclear facilities.

  • Fire Protection/Fire Safety - Experience in the preparation of written fire protection analyses that include one of the following topics: Fire Hazard Analyses, fire modeling, or performance-based design.

  • Accident Analysis – Experience in using concepts from DOE-HDBK-3010-94 or NUREG/CR-6410 in the development of accident analysis related calculations in complex nuclear environments. Experience in completing dose consequences to onsite and offsite individuals for chemical and radiological releases resulting from flammability issues, spray releases, spills, boiling, explosions, and crushing events is desired.

  • Emergency Management - Experience in emergency planning or preparedness in either the nuclear (NRC / DOE / FEMA-REP regulations) or chemical (EPA / OSHA regulations) industry. Experience in one or more of the following is desired: hazards identification & screening, accident analysis, consequence assessment, drill & exercise.

  • Criticality Safety - Experience in preparing Criticality Safety Evaluations/Analysis reports or experience using criticality safety analysis computer codes (eg., SCALE or MCNP) with an understanding of criticality safety related Department of Energy orders and standards, NRC regulatory guides, and ANSI/ANS-8 criticality safety national consensus standards.

  • Technical Specifications – Experience in the development or implementation of NRC Technical Specifications or the DOE Technical Safety Requirements. Requires a working knowledge of the DOE Orders and Standards.

  • Regulatory Programs – Experience in performing day to day support of the facility operations with respect to the safety basis documentation in compliance with DOE and federal regulations along with performing and reviewing Unreviewed Safety Questions. Assist in safety basis implementation activities such as procedure review, implementation planning, and assessments.

  • Regulation Analysis/Licensing Documentation – Experience in the development, preparation, submission, and defense of licensing documentation for both NRC and DOE facilities. This will include the revision, updating, or amending existing regulatory documents, license applications, and supporting documents.

  • Cognizant System Engineer - Responsible for maintaining overall cognizance of assigned systems, providing systems engineering support for operations and maintenance, and technical support of line management safety responsibilities for ensuring continued system operational readiness.

  • Risk Analysis- Capable of developing, documenting and defending probabilistic risk analyses in nuclear industry environments. This includes familiarity with the DOE and/or NRC commercial, or related chemical process industry sector nuclear risk analysis guidance documents and standards. Risk analysis capabilities should include one or more of the following: fault tree analysis, event tree analysis, probabilistic risk assessment (PRA), probabilistic human and equipment reliability assessments, and project risk assessments. The successful candidate should have familiarity with current software in this field (CAFTA, SAPHIRE, etc.).

What We Offer

When you join AECOM, you become part of a company that is pioneering the future . Our teams around the world are involved in some of the most cutting-edge and innovative projects and programs of our time, addressing the big challenges of today and shaping the built environment for generations to come. We ensure a workplace that encourages growth, flexibility and creativity, as well as a company culture that champions inclusion, diversity and overall employee well-being through programs supported by company leadership. Our core values define who we are, how we act and what we aspire to, which comes down to not only delivering a better world , but working to “make amazing happen” in each neighborhood, community and city we touch. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours.

Job Category Engineering

Business Line Management Services

Business Group Management Services Group (MS)

Country United States of America

Position Status Full-Time

Requisition/Vacancy No. 203293BR

Clearance Required No

Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.